The quality-driven process workflow in our coating systems also contributes to excellence in our delivery of coated products. With a wide range of products for both the low and high end market. EMPICO offers coating solutions which are cost effective, increase process uptime and efficiency, as well as providing peace of mind on safety from chemical interaction, corrosion or contamination.
Fast becoming an integral part of our lives, protective coatings are essential, useful and highly in demand, especially with their exceptional attributes and properties, of which, not to mention, are also environmentally-friendly.
NON STICK COATING
Very few solid substances will permanently adhere to a Teflon finish. And while tacky materials may show some adhesion, almost all substances release easily.
Since surfaces coated with Teflon are both oleo phobic and hydrophobic, they are not readily wet. Cleanup is easier and more thorough- in many cases, surfaces are self cleaning.
UNIQUE ELECTRICAL PROPERTIES
Over a wide range of frequencies. Teflon has high dilectric strength, low dissipation factor and very high surface resistivity. By special techniques, it can even be made electro conductive enough to be used as an anti-static coating.
Teflon is normally unaffected by chemical environments. The only chemicals known to affect all Teflon industrial coatings are molten alkali metals and highly reactive fluorinating agents.
LOW COEFFICIENT OF FRICTION
The coefficient of friction of Teflon is generally in the range of 0.05 to 0.20, depending on the load, sliding speed and particular Teflon coating used.
Teflon industrial coating can operate continuously at temperatures up to 290 C/550 f and can be used for intermittent service up to 315 C/600 F with adequate ventilation.
Many Teflon industrial coating withstand severe temperature extremes without loss of physical properties. Teflon industrial maybe considered for use at temperatures as low as -270 C/-454 F.